Table of Contents
Advertisement
D-Link Unified Access System
Field
WLAN Bytes Received
WLAN Packets Transmitted
WLAN Bytes Transmitted
WLAN Packets Receive Dropped
WLAN Bytes Receive Dropped
WLAN Packets Transmit Dropped
WLAN Bytes Transmit Dropped
Ethernet Packets Received
Ethernet Bytes Received
Ethernet Packets Transmitted
Ethernet Bytes Transmitted
Multicast Packets Received
Total Receive Errors
Total Transmit Errors
ARP Reqs Converted from Bcast to
Ucast
Filtered ARP Requests
Broadcasted ARP Requests
Viewing Managed Access Point Radio Statistics
The radio statistics show detailed information about the packets and bytes transmitted and received on the radio (wireless)
interface of a particular access point managed by the switch.
Use the options above the table to select the AP and radio with the settings to view. The AP is identified by its MAC address
and location. The radio is identified by its number and configured mode. If the radio is disabled, the radio mode will be
displayed as Off.
Table 294
describes the fields you see on the Radio page for the managed access point statistics.
Field
WLAN Packets Received
WLAN Bytes Received
WLAN Packets Transmitted
Page 472
Monitoring Status and Statistics
Table 293: Detailed Managed Access Point Statistics
Description
Total bytes received by the AP on the wireless network.
Total packets transmitted by the AP on the wireless network.
Total bytes transmitted by the AP on the wireless network.
Number of packets received by the AP on the wireless network that were
dropped.
Number of bytes received by the AP on the wireless network that were
dropped.
Number of packets transmitted by the AP on the wireless network that were
dropped.
Number of bytes transmitted by the AP on the wireless network that were
dropped.
Total packets received by the AP on the wired network.
Total bytes received by the AP on the wired network.
Total packets transmitted by the AP on the wired network.
Total bytes transmitted by the AP on the wired network.
Total multicast packets received by the AP on the wired network.
Total receive errors detected by the AP on the wired network.
Total transmit errors detected by the AP on the wired network.
Number of ARP requests that the AP converted from a broadcast packet to
a unicast packet before sending to the wireless link.
Number of ARP requests that AP was able to drop instead of sending on the
wireless link.
The number of ARP requests sent as broadcasts on the VAPs. This counter
does not include WDS links. The same ARP frame may be counted multiple
times when it is broadcasted on multiple VAPs. The counter is available even
when ARP suppression is disabled.
Table 294: Managed Access Point Radio Statistics
Description
Total packets received by the AP on this radio interface.
Total bytes received by the AP on this radio interface.
Total packets transmitted by the AP on this radio interface.
Software User Manual
Document 34CSFP6XXUWS-SWUM100-D7
12/10/09
- Quick Links:
- Section 1: Getting Started
Hide quick links:
Advertisement
Table of Contents
