Software User Manual
12/10/09
TACACS+ S
ERVER
Use the TACACS+ Server Configuration page to configure up to five TACACS+ servers with which the switch can
communicate.
To display the TACACS+ Server Configuration page, click LAN > Security > TACACS+ > Server Configuration in the
navigation menu.
Figure 287
shows the TACACS+ Accounting Server Configuration page when no TACACS+ servers are configured or when
you select Add from the TACACS+ Server field.
After you add one or more TACACS+ servers, additional fields appear on the TACACS+ Server Configuration page.
Field
TACACS+ Server
IP Address
Port
Key String
Connection Timeout
•
Click Refresh to update the page with the most current information.
•
If you make changes to the page, click Submit to apply the changes to the system.
•
To delete a configured TACACS+ server, select the IP address of the server from the RADIUS Server IP Address drop-
down menu, and then click Remove.
Document
34CSFP6XXUWS-SWUM100-D7
C
ONFIGURATION
Figure 287: TACACS+ Configuration—No Server
Table 254: TACACS+ Configuration Fields
Description
Use the drop-down menu to select the IP address of the TACACS+ server to view or
configure. If fewer than five TACACS+ servers are configured on the system, the Add
option is also available. Select Add to configure additional TACACS+ servers.
Enter the IP address of the TACACS+ server to add. This field is only available when
Add is selected in the TACACS+ Server field.
The authentication port number through which the TACACS+ session occurs. The
default is port 49, and the range is 0-65535.
Defines the authentication and encryption key for TACACS+ communications between
the device and the TACACS+ server. This key must match the encryption used on the
TACACS+ server. The valid range is 0-128 characters.
The amount of time that passes before the connection between the device and the
TACACS+ server times out. The field range is from 1 to 30 seconds.
D-Link Unified Access System
TACACS+ Settings
Page 399