Table of Contents
Advertisement
Software User Manual
12/10/09
You can configure the Captive Portal traps only if the Captive Portal Trap Mode is enabled, which you
configure on the LAN > Administration > SNMP Manager > Trap Flags page.
All CP SNMP traps are disabled by default.
To configure SNMP trap settings for various captive portal features, click Security > Captive Portal > SNMP Trap
Configuration.
The traps specified in the table below are generated only by the Cluster Controller unless otherwise specified.
The following table describes the events that generate SNMP traps when the status is Enabled.
Field
Captive Portal Trap Mode
Client Authentication Failure
Traps
Client Connection Traps
Client Database Full Traps
Client Disconnection Traps
P
A
C
ORT
CCESS
In port-based authentication mode, when 802.1X is enabled globally and on the port, successful authentication of any one
supplicant attached to the port results in all users being able to use the port without restrictions. At any given time, only one
supplicant is allowed to attempt authentication on a port in this mode. Ports in this mode are under bidirectional control. This
is the default authentication mode.
The 802.1X network has three components:
Document
34CSFP6XXUWS-SWUM100-D7
Figure 271: SNMP Trap Configuration
Table 241: SNMP Trap Configuration
Description
Displays the captive portal trap mode status. To enable or disable the mode, use
Captive Portal menu on the LAN > Administration > SNMP Manager > Trap Flags
page.
If you enable this field, the SNMP agent sends a trap when a client attempts to
authenticate with a captive portal but is unsuccessful.
If you enable this field, the SNMP agent sends a trap when a client authenticates with
and connects to a captive portal.
If you enable this field, the SNMP agent sends a trap each time an entry cannot be
added to the client database because it is full.
If you enable this field, the SNMP agent sends a trap when a client disconnects from
a captive portal.
ONTROL
D-Link Unified Access System
Port Access Control
Page 383
- Quick Links:
- Section 1: Getting Started
Hide quick links:
Advertisement
Table of Contents
