Supported Mibs; Figure 66: Trap Flags Configuration; Table 56: Trap Flags Configuration Fields - D-Link DWS-4026 User Manual

Dws-4000 series unified wired & wireless access system
Table of Contents

Advertisement

D-Link Unified Access System
Field
ACL Traps
Authentication
Captive Portal
Global Wireless Traps
Link Up/Down
Multiple Users
PoE
Spanning Tree
If you make any changes to this page, click Submit to apply the changes to the system.
S
MIB
UPPORTED
S
The Supported MIBs page lists the MIBs that the system currently supports.
To access the Supported MIBs page, click LAN > Monitoring > Supported MIBs in the navigation menu. A portion of the
web screen is shown
Figure
Page 128
Defining SNMP Parameters

Figure 66: Trap Flags Configuration

Table 56: Trap Flags Configuration Fields

Description
Enable or disable activation of ACL traps by selecting the corresponding line on
the pulldown entry field. The factory default is disabled.
Enable or disable activation of authentication failure traps by selecting the
corresponding line on the pulldown entry field. The factory default is enabled.
Enable or disable allowing the SNMP agent on the switch to generate captive
portal SNMP traps. The factory default is Disable which prevents the SNMP
agent on the switch from generating any captive portal SNMP traps, even if they
are individually enabled.
Enable or disable activation of Global Wireless traps by selecting the
corresponding line on the pulldown entry field. The factory default is enabled.
Enable or disable activation of link status traps by selecting the corresponding line
on the pulldown entry field. The factory default is enabled.
Enable or disable activation of multiple user traps by selecting the corresponding
line on the pulldown entry field. The factory default is enabled. This trap is
triggered when the same user ID is logged into the switch more than once at the
same time (either via telnet or the serial port).
Enable or disable activation of PoE traps by selecting the corresponding line on
the pulldown entry field. The factory default is enabled.
Enable or disable activation of spanning tree traps by selecting the corresponding
line on the pulldown entry field. The factory default is enabled.
67.
Software User Manual
Document 34CSFP6XXUWS-SWUM100-D7
12/10/09

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dwl-8600apDws-4000 series

Table of Contents