Table of Contents
Advertisement
Software User Manual
12/10/09
Attribute
Number
WISPr-Bandwidth-
14122, 8
Max-Down
D-Link-Max-Input-
171, 124
Octets
D-Link-Max-Output-
171, 125
Octets
D-Link-Max-Total-
171, 126
Octets
I
A
NTERFACE
SSOCIATION
From the Interface Association page, you can associate a configured captive portal with a specific physical interface or
wireless network (SSID). The CP feature only runs on the wired or wireless interfaces that you specify. A CP can have
multiple interfaces associated with it, but an interface can be associated to only one CP at a time.
When associating a physical (wired) interface with a captive portal configuration, note the following
restrictions:
•
Captive portal and STP should not be enabled on the same physical interface.
•
Captive portal and 802.1X cannot be enabled on the same physical interface.
•
Port security and captive portal cannot be enabled on the same physical interface.
•
If a physical interface is made a LAG member, the captive portal becomes disabled on the interface.
To associate interfaces with CPs, click Security > Captive Portal > Interface Association.
Document
34CSFP6XXUWS-SWUM100-D7
Table 230: Captive Portal User RADIUS Attributes
Description
Maximum client receive rate (b/
s). Limits the bandwidth at
which the client can receive
data from the network. If the
attribute is 0 or not present,
then use the value configured
for the captive portal.
Maximum number of octets the
user is allowed to transmit.
After this limit has been
reached, the user will be
disconnected. If the attribute is
0 or not present, then use the
value configured for the captive
portal.
Maximum number of octets the
user is allowed to receive. After
this limit has been reached, the
user will be disconnected. If the
attribute is 0 or not present,
then use the value configured
for the captive portal.
Maximum number of octets the
user is allowed to transfer (sum
of octets transmitted and
received). After this limit has
been reached, the user will be
disconnected. If the attribute is
0 or not present, then use the
value configured for the captive
portal.
D-Link Unified Access System
Range
Usage
Integer
Optional
Integer
Optional
Integer
Optional
Integer
Optional
Captive Portal Configuration
Default
–
–
–
–
Page 373
- Quick Links:
- Section 1: Getting Started
Hide quick links:
Advertisement
Table of Contents
