Hitachi PC-ARF Technical Catalogue page 672

Hide thumbs Also See for PC-ARF:

Table of Contents

7 Gateways for building management systems

To create a new project, select a project with the same external protocol as the one you want to use and press New.

You will be asked whether a copy of a selected project or a new one is to be created.

If you select Yes, you will be able to specify the name and description of the new project, based on the same external pro-

tocol selected. If you select No, you will also be able to select the type of machines to use in the new project.

When you accept, a new folder will be created within the project folder, with the name of the project. If you select new

project without copying from another, the configuration by default will be that defined in the template files. Otherwise,

it will be the same as that of the copied project.

Connection with KNX001

Even if there is no connection with con KNX001 (Off-line), it is possible configure KNX001 easily in the office.

Before you can download the configuration and monitor KNX001, connection must be established between HGT

and KNX001 (On-line). This is done with the following steps:

1 Ensure that KNX001 is powered and correctly connected to the KNX bus and the external system.

2 Connect HGT, using the connector marked PC, to a serial port of the PC. USB-RS232 adaptors can be used.

3 In HGT select the serial port to be used for the connection, via Configuration Menu -> Connection.

TCGB0106 rev.0 - 12/2014

Troubleshooting