Wireless Remote Controls - Hitachi PC-ARF Technical Catalogue

Hide thumbs Also See for PC-ARF:

Table of Contents

2 Control solutions

Great control possibilities

2.2.1.2 Wireless remote controls

Wireless remote controls are the most suitable option for those users who are only interested in basic functions (ON/OFF,

setting temperature, fan speed and louvre direction). Optional functions cannot be set by wireless remote controls.

These remote controls do not require electrical connection between the remote control and the indoor unit, since they are

wireless. Anyway, they require the installation of the wireless receiver kit which receives the signal from the wireless remote

control and sends it to the indoor unit.

There are two types of wireless receiver kits depending on its installation place: Panel receivers and Wall receivers.

Panel receivers

(*): This example shows the case of the wireless receiver kit PC-ALH3 which corresponds to the indoor unit RCI-FSN3. For

the rest of wireless receiver kits and their corresponding indoor unit, refer to the previous chapter.

Wall receivers

PC-LH3A is intended for use in combination with receiver kits PC-ALH, PC-ALHN, PC-ALHC, PC-ALHD or PC ALHZ

and indoor units with no support for HIGH2 fan speed mode. PC-LH3A can also be used with receiver kits PC-ALH3,

PC-ALHP1 or PC-ALHZF, but HIGH2 fan speed cannot be selected through PC-LH3A in this case.

PC-LH3B is intended for use in combination with receiver kits PC-ALH3, PC-ALHP1 or PC-ALHZF and indoor units

with support for HIGH2 fan speed mode. It can also be used in combination with receiver kits PC-ALH, PC-ALHN,

PC-ALHC, PC-ALHD or PC ALHZ, but the selection of HIGH2 fan speed through PC-LH3B has no effect in this case.

TCGB0106 rev.0 - 12/2014

RCI-FSN3 (*)

Up to 16 indoor units