Hitachi PC-ARF Technical Catalogue page 602

Hide thumbs Also See for PC-ARF:

Table of Contents

6 Building air conditioning controls

CSNET Manager LT/XT

Import units from CSNET Manager

In order to make easy your layout creation you can import the current units of the CSNET Manager. To do this, you have

to open the option file properties and select the Import units tab

On this tab you must enter the IP, port, user and password from one CSNET Manager to get the units existing on the data

If you need to pass through a proxy to connect with one CSNET Manager you must set the check box of column proxy and

after go to the proxy tab and set the proxy configuration:

C A U T I O N

When you configure your installation on CSNET Manager you must use the same order of HARCS than here. If you change this order the

port number of the units will be different and layout will consider these units as other ones

When you click import, Building Layout will use these files to load the unit's information and next window will appear

This dialog will show you the state of each import action.

After end the importation process, you can find the units on the shape dialogue clicking on option load.

Making this you can forget to write manually the information of each unit, and you only have to select which unit is on a list.

TCGB0106 rev.0 - 12/2014

Troubleshooting