Table of Contents
Advertisement
CAUTION: 18. Do not use solvents (such as paint thinner, benzine, or alcohol) or abrasive
cleansers for cleaning the system. These substances may cause deterioration
in the monitor.
19. Deterioration of electrical and mechanical safety characteristics (such as
generation of a leakage current or deformation/abrasion of mechanical parts)
and of image sensitivity and resolution may occur over a period of time. A
maintenance service contract is recommended to avoid accidents and
erroneous diagnosis and to maintain system performance.
20. If the main switch is tripped, be sure to consult your TOSHIBA representative. If
the main switch is turned ON again without checking the problem, the system or
the device may be damaged more seriously.
21. Operation of the CD-R drive
(1) Do not place adhesive labels on the disk. They may cause read errors or
scratches on the disk.
(2) A disk that has been purchased in a spindle package may have protective
sponge material applied to its surface. If such sponge material enters the
internal mechanism of this unit, a malfunction may result. Confirm that
there are no traces of sponge material on the disk before loading it into the
unit.
(3) The tray slides out approximately 15 cm when it is ejected. Keep the area
in front of the tray clear. If the tray hits an obstacle, the tray may be
damaged.
(4) Confirm that the disk is placed correctly in the tray. If the disk is not placed
correctly, it may be damaged when it starts rotating.
22. When the CD-R disk is not being used, remove the disk from the drive. The
disk may be damaged if the system fails.
23. There may be some missing dots or light-emitting dots on the LCD monitor
screen. This is common with LCD panels and does not mean that the LCD
monitor is defective.
24. Manage the system properly to prevent it from being infected with computer
viruses.
No. 2B730-973EN*D
S-11
Advertisement
Table of Contents
