Interface For Card Readers - Bosch APC-AMC2-4R4CF Installation Manual
Access modular controller 2
Hide thumbs
Also See for APC-AMC2-4R4CF:
- Installation manual (56 pages) ,
- Manual (56 pages) ,
- Installation manual (52 pages)
Table of Contents
Advertisement
72
en | Installing
Wiegand reader type W 3
This wiring diagram refers to the following readers from the BOSCH catalog:
Wiegand reader type W 4
The reader has an additional DIL switch to choose the following parameter settings.
S1 =
S2 =
S3 =
S4 =
S5 =
Notice!
In the default delivery status pin 2 is set to ON.
4.14
RS-485 Interface for Card Readers
The AMC2-4R4 has four RS-485 interfaces. Each interface is connected using a 10-pin
pluggable screw connector (S2, S7, S14, and S19).
Figure 4.57: Location of the RS-485 interfaces for external devices
2020-01 | V02 |
CTN
Part Number
ARD-AYK12
F.01U.075.408
ARD-AYJ12
F.01U.075.388
ARD-AYH12
F.01U.075.389
ARD-AYQ12
F.01U.075.390
ARD-AYCE65B
F.01U.075.391
on
The beeper is controlled by input 1.
on
The beeper will always be set after card reading.
on
The LED displays will be controlled by the reader.
off
on
The beeper is controlled by input 2.
Installation manual
Access Modular Controller 2
Bosch Access Systems V.B.
Advertisement
Table of Contents
