Table of Contents
Advertisement
Philips Semiconductors
ARM-based Microcontroller
The SPI rate may be calculated as: PCLK rate / SPCCR value. The pclk rate is CCLK / VPB divider rate as determined by the
VPBDIV register contents.
SPI Interrupt Register (S0SPINT - 0xE002001C, S1SPINT - 0xE003001C)
This register contains the interrupt flag for the SPI interface.
Table 120: SPI Interrupt Register (S0SPINT - 0xE002001C, S1SPINT - 0xE003001C)
SPINT
Function
0
SPI Interrupt
7:1
Reserved
SPI Interface
SPI interrupt flag. Set by the SPI interface to generate an interrupt. Cleared by writing
a 1 to this bit.
Note: this bit will be set once when SPIE=1 and at least one of SPIF and WCOL bits
is 1. However, only when SPI Interrupt bit is set and SPI Interrupt is enabled in the
VIC, SPI based interrupt can be processed by interrupt handling software.
Reserved, user software should not write ones to reserved bits. The value read from
a reserved bit is not defined.
LPC2119/2129/2194/2292/2294
Description
185
Preliminary User Manual
Reset
Value
0
NA
May 03, 2004
Advertisement
Table of Contents
