Table of Contents
Advertisement
6-4. SNMP Mode Command Details
6-4-1. SNMP Command List
1. Log on the network via telnet. (Refer to Section 6-3.)
2. Enter "snmp".
The machine enters the SNMP setting mode.
3. Enter "HELP" or "?".
List of the SNMP commands is displayed.
telnet>snmp
SNMPmenu>help
Command List
Setconf : Set SNMP Configurations
Prconf : Show SNMP Configurations
Setmib : Set MIB Parameters
Prmib : Show MIB Parameters
Loadmib : Load MIB Parameters from Robot
Storemib : Store MIB Parameters to Robot
Quit : Return to Main Menu
Setconf : Sets the SNMP configurations. (Refer to Section 6-4-2.)
Prconf :
Shows the SNMP configurations. (Refer to Section 6-4-3.)
Setmib :
Sets the MIB parameters. (Refer to Section 6-4-4.)
Prmib :
Shows the MIB parameters. (Refer to Section 6-4-5.)
Loadmib : Returns the MIB settings to the original settings that have been backed up. (Refer to
Section 6-4-6.)
Storemib : Creates the backup copy of the MIB settings. (Refer to Section 6-4-7.)
Quit :
Quits the SNMP setting mode. (Refer to Section 6-4-8.)
6-4 (E)
PDJ-A640 IM
Advertisement
Table of Contents
