Table of Contents
Advertisement
3-5. Setting System Control Unit
1. Remove the four screws and remove the lower rear
cover.
2. Remove the two fixing screws of the system control
unit in the lower most-stage, and draw out the system
control unit.
System control unit
3-4 (E)
3. Remove the two screws, and remove the board cover.
Lower rear cover
4. Setting the DIP switch
B4 x 6
B3 x 6
B3 x 6
Board cover
Set the DIP switches S1, S4, and S8 on the system
control board (node board) of the PDJ-A640 as
follows.
S8
System control board
System control board
System control unit
S1
S4
PDJ-A640 IM
Advertisement
Table of Contents
