Table of Contents
Advertisement
3-2-2. Opening and Closing the Door
1. Remove the screw, and remove the lock cover.(Fig.1)
n
Store the removed lock cover and the screw in a safe
place. After the machine is installation, reinstall the
lock cover to its original position with the screw.
2. Push down the lock lever with the screwdriver to
unlock. (Fig.2)
3. Open the door in the direction of arrow A.
Lock cover
Lock lever
3-2 (E)
3-3. Installation Flowchart
The installation procedure is shown in the following
flowchart.
See each section about the detail.
A
B3 x 6
Fig.1
Screwdriver
Fig.2
Start
3-1. Precaution
3-2. Preparation
3-4. Securing the Professional Disc Cart
Main Unit
3-5. Setting System Control Unit
3-6. Removing/Moving the Fixed Parts at
Shipment
3-7. Installing the DECK
3-8. Setting the Barcode Type
3-9. Connecting/Tying the Cables
3-10. Setting the DECK
3-11. Setting the DECK Mounted on the
PDJ-A640
3-12. Inserting/Removing the Optical Disc
Cartridge
3-13. Optimization of the Bin Position
End
PDJ-A640 IM
Advertisement
Table of Contents
