Pod; Disconnecting/Reconnecting Cables; Installing Option Software - Sony Vision Exchange PEQ-C100 System Integration & Services Manual

Collaboration system

Hide thumbs Also See for Vision Exchange PEQ-C100:

Table of Contents

Touch panel display connection (USB connection)

A USB type touch panel can be connected to a display. A touch panel allows the presenter to

conduct a smooth dynamic session by simply swiping on the screen to switch the displayed

image.

To connect a touch panel display, in addition to the HDMI connector or DISPLAY PORT

connector connection for sending video, it must also be connected via USB to transmit touch

gesture controls.

Connect the main unit and the display using a USB cable.

Third-party device driver installation

Device drivers must be installed separately for touch panel displays and other devices whose

connection is not recognized by the Windows standard driver.

For details, see "Third-party device drivers" (page 48) in the "Installing Third-Party Software"

section.

Pod

Connect between the main unit and Pods using wired LAN network connections.

Note

Enable only one Ethernet setting in [Network Connections] in the [Control Panel]. Disable

Wi-Fi, Bluetooth, and other networks.

For details about the computer setup procedure, refer to the manual supplied with the

computer.

For details about installation and operation of Pod PC Software, refer to the Help Guide.

Correct operation when connecting and disconnecting cables, excluding the HDMI input

connector, during operation is not guaranteed.

Before connecting or disconnecting cables, make sure that the power supply is first turned off.

If you have already purchased a license as described in "Preparation Before Installation" (page

41), you will need the installation key obtained from your dealer.

For details about installation of option software, see "Preparation Before Installation" (page

41) and refer to the Help Guide.

Table of Contents

Vision exchange peq-c130