Throughput of devices connected to a Pod
Calculate the throughput corresponding to the red arrow in "Network bandwidth diagram for
active learning" (page 22).
The total throughput of devices connected to a Pod or the main unit is calculated using the
same equations described in "Network bandwidth" (page 12) in the "Interactive Lecture"
section.
The result of the calculation multiplied by the number of Pods (N
that the wireless LAN access point must maintain.
Total throughput of devices connected to a Pod
= (T
× N
content
Required bandwidth =
= (6 Mbps × 2 + 1 Mbps × (2 – 1)} × 1
= 13 Mbps
Network bandwidth that must be maintained between Pod and layer 2 switch
Calculation equation
Required bandwidth (T
× Number of Pods
+ Total throughput from Pods to main unit
+ Total throughput from main unit to Pods
Use the value calculated in "Network bandwidth that the wireless LAN access point must
maintain" (page 23) for the total throughput from wireless LAN access point to Pod.
Use the following equations to calculate the total throughput from Pods to main unit and the
total throughput from main unit to Pods.
+ T
× (N
disp
thumbnail
win
(Eqn.
A) × Number of Pods (N
) = Total throughput from wireless LAN access point to Pod
pod
pod
– N
)}......(Eqn.
A)
disp
)
pod
(Eqn.
(Eqn.
24
) is the network bandwidth
(Eqn.
B)
C)
A)