Large-Scale 10-Pod Configuration - Sony Vision Exchange PEQ-C100 System Integration & Services Manual
Collaboration system
Hide thumbs
Also See for Vision Exchange PEQ-C100:
- System integration & services manual (117 pages) ,
- Help manual (86 pages) ,
- Instructions before use (2 pages)
Table of Contents
Advertisement
Network bandwidth that must be maintained between main unit and layer 2 switch
Calculation equation
Required bandwidth (T
+ Total throughput from Pods to main unit
+ Total throughput from main unit to Pods
+ Total for video conferencing
+ Streaming output
= (6 Mbps × 2 + 1 Mbps × 4)
+ (6 Mbps × 0 + 1 Mbps × 6)
+ (6 Mbps × 6)
+ (4 Mbps + 4 Mbps)
+ 6 Mbps
= 72 Mbps
Adding the margin of 30%, 72 Mbps × 1.3＝93.6 Mbps
Note that if a presentation is predominantly composed of still images, the throughput will be
lower and hence the required bandwidth will also be lower. Estimate the network bandwidth to
match the intended use.
Large-scale 10-Pod configuration
This section describes how to calculate the required network bandwidth for a large-scale
configuration using ten Pods.
In the same way as when using three Pods, determine the maximum number of simultaneous
mirroring devices connected to the main unit and Pods beforehand as described in "Maximum
number of simultaneous mirroring user devices" (page 20) in the "Active Learning" section.
Next, calculate the network bandwidth that the wireless LAN access point and layer 2 switch
must maintain.
The proposed configuration is listed below.
User devices connected to main unit and Pods
- Windows devices: 6 each (with image quality set to [High])
Pods: 10
Number of displays connected to the main unit: 2
Video conferencing: Bandwidth set to maximum value.
Streaming output: Image quality set to [High]
Margin: 30%
) = Total throughput of user devices connected to main unit
main
(light blue
(Eqn.
(Eqn.
(pink
arrow)
arrow)
39
(Eqn.
B)
C)
A)
Advertisement
Table of Contents
