Measuring The Duty (Load Factor) - Yamaha ERCX Series User Manual
Single-axis robot controller
Hide thumbs
Also See for ERCX Series:
- User manual (148 pages) ,
- Supporting supplement manual (34 pages)
Table of Contents
Advertisement
10-7 Duty (load factor) monitor
10
22
10-
10-7-1 Measuring the duty (load factor)
n
NOTE
The duty monitor function can be used when the controller version is 13.50 or later and the TPB version is 12.60 or
later.
1) Press
(MON) on the TPB initial screen
F4
while moving the robot with a point move-
ment command (ABS-PT, INC-PT) or a
program start command (AUTO-R, STEP-R)
via the I/O connector.
2) Next, press
(DUTY).
F2
3) Press
(RUN) to start measuring the
F1
operation duty.
4) Press
(STOP) to stop measuring the
F2
operation duty.
5) Next, press
(RSLT) to display the
F3
measurement result on the TPB screen.
6) The operation duty value appears as a percent
on the TPB screen.
n
NOTE
The operation duty can also be monitored while the program is being executed with a program command. For more
information, see "10-7 Duty (load factor) monitor". The method for displaying the measurement result is the same
as described above.
[MENU]
select menu
1EDIT2OPRT3SYS 4MON
[MON]
select menu
1DIO 2DUTY
[MON-DUTY]
select menu
1RUN 2STOP
3RSLT
[MON-DUTY]
select menu
measuring ...
3RSLT
2STOP
1RUN
[MON-DUTY]
select menu
2STOP 3RSLT
1RUN
[MON-DUTY-RSLT]
measuring result
X:
12%
Advertisement
Table of Contents
Troubleshooting
