Sony DVS-9000 User Manual page 277
Production switcher system with center control panel
Hide thumbs
Also See for DVS-9000:
- User manual (1228 pages) ,
- Installation manual (42 pages) ,
- Operation manual (24 pages)
Table of Contents
Advertisement
1
In the Frame Memory menu, select VF3 'Reposition/Lock' and HF2
'Reposition.'
The Reposition/Lock>Reposition menu appears. In this menu, you can
also enable the frame memory pair function (see page 267).
2
In the <Reposition> group, select the movement mode (see page 64).
Normal: Move in normal mode.
Black&White: Move in black & white mode.
3
With the knobs, adjust the parameters to move the image.
Knob
1
2
The surroundings of the moved image on the screen are filled with black.
4
To return the image moved by the reposition function to the center
position, in the <Reposition> group press [Center].
Note
It is not possible to write the image moved by the reposition function
directly to frame memory.
Fixing the output image selection (lock function)
Use the following procedure.
1
In the Frame Memory menu, select VF3 'Reposition/Lock' and HF3
'Lock.'
The Reposition/Lock>Lock menu appears. In this menu, you can also
enable the frame memory pair function (see page 267).
2
Press [Lock], turning it on.
This fixes the currently selected frame memory output image.
To release the lock, in step 2 above, set [Lock] to off.
Parameter
Adjustment
Position H
Move in horizontal direction –200.00 to +200.00
Position V
Move in vertical direction
Setting values
–200.00 to +200.00
Frame Memory Operations
277
Advertisement
Table of Contents
