Signal Assignment And Selection - Sony DVS-9000 User Manual
Production switcher system with center control panel
Hide thumbs
Also See for DVS-9000:
- User manual (1228 pages) ,
- Installation manual (42 pages) ,
- Operation manual (24 pages)
Table of Contents
Advertisement
Signal Assignment and Selection
Assigning signals to buttons
Each cross-point button has a corresponding button number, to which you
assign a signal.
In addition to the signals input to the PRIMARY INPUTS connectors on the
rear panel of the switcher, you can also select signals generated within the
switcher.
Each button has assigned to it a video signal and a key signal, forming a pair.
You can set these video and key combinations in a Setup menu.
For details of Setup menu operations, see Chapter 16 "Engineering Setup"
(Volume 2).
Cross-point button control block button numbers
On the M/E and PGM/PST banks, each cross-point button and reentry button
has two button numbers, and you use the shift button to switch between these
numbers.
The button numbers are as follows.
20
Signal Selection
Advertisement
Table of Contents
