Sony DVS-9000 User Manual page 248
Production switcher system with center control panel
Hide thumbs
Also See for DVS-9000:
- User manual (1228 pages) ,
- Installation manual (42 pages) ,
- Operation manual (24 pages)
Table of Contents
Advertisement
1
2
3
4
Rotating the wipe pattern (Rotation)
You can apply rotation independently to the main pattern and sub pattern. Use
the following procedure.
1
2
248
Basic Procedure for Wipe Settings
In the device control block, press the [M/E1] or [P/P] button, turning it on.
The buttons in the device control block are assigned to the wipe position
setting as follows.
Table 1: Buttons and assigned settings
Button name
Setting
K1 CB1
Wipe position for key 1
K2 CB2
Wipe position for key 2
K3 FM1
Wipe position for key 3
K4 FM2
Wipe position for key 4
MAIN
Wipe position for common transition (main pattern)
SUB
Wipe position for common transition (sub pattern)
Table 2: Buttons assigned to functions
Button name
Function
POS
Toggle Position on or off.
X, Y
Fix the operating direction, and enable setting of the wipe
position from the numeric keypad.
CTR
Return the pattern position to the center of the screen.
Press one of the buttons in Table 1 above, to select the wipe position to
which the operation applies. Multiple selection is possible.
Press the [POS] button, turning Position on.
Move the trackball, to set the wipe position. By pressing the [X] button,
turning it on, you can restrict movement to the horizontal direction, and by
pressing the [Y] button, turning it on, you can restrict movement to the
vertical direction. Also, when either of these buttons is lit, you can enter a
coordinate of the wipe position from the numeric keypad.
In the M/E-1> Wipe menu, select HF5 'Main Modify.'
The Main Modify menu appears.
In the <Rotation> group, select the rotation type.
Angle: Incline the pattern through a fixed angle.
Advertisement
Table of Contents
