Siemens SINAMICS S120 Equipment Manual page 156
Chassis liquid cooled power units
Hide thumbs
Also See for SINAMICS S120:
- Function manual (1094 pages) ,
- Diagnostic manual (947 pages) ,
- Manual (848 pages)
Table of Contents
Advertisement
Motor Modules
5.5 Installation
Screw coupling points for mechanical support
Since the Motor Modules are housed in a very slim enclosure, they need to be mechanically
supported against lateral movement and vibration if they are installed in a control cabinet.
Screw coupling points are provided on the top and bottom of the units for this purpose.
If several modules are mounted adjacent to one another, they can be interconnected via the
screw coupling points. When a single module is installed, lateral support can be provided by
means of reinforcing plates inserted between the module and the cabinet.
Protection guard
A protection guard is mounted on the bottom of the Motor Module ("1" in the diagram below)
for use during transportation. The Motor Module can be rested on this protection guard while
it is removed from the packaging and during transportation.
Before the module is installed at its final location, this guard must be removed. To do this,
remove the 4 screws ("2" in the diagram) and remove the guard.
Figure 5-11
154
Protection guard
Chassis Liquid Cooled Power Units
Manual, (GH7), 01/2011, 6SL3097-4AM00-0BP1
Advertisement
Table of Contents
