Pbx Configuration-[2-4] System-Week Table; Pbx Configuration-[2-4] System-Week Table-Time Setting - Panasonic KX-NS1000 Pc Programming Manual

Hide thumbs Also See for KX-NS1000:

Table of Contents

10.4 PBX Configuration—[2-4] System—Week Table

A specific time mode (day, night, lunch, or break) can be selected for operation depending on the time of day.

The time mode can be switched either automatically or manually. Select the desired switching mode from the

Time Service Switching Mode option.

Time Table numbers correspond to tenant numbers (for example, Tenant 1 uses Time Table 1). Select the

desired Time Table from the Time Table No. list.

When in Automatic Switching mode, the time modes of the tenant are switched as programmed in the

corresponding Time Table. Manual switching is possible only from an authorized extension (determined by

To adjust the currently displayed Time Table, click and drag the divisions between two time periods.

To program the time blocks of the currently displayed Time Table, including adding or deleting time blocks,

click Time Setting.

10.4.1 PBX Configuration—[2-4] System—Week Table—Time

The start times of 4 different time blocks can be programmed for each day of the week, for the selected Time

Table, as well as the start and end times of up to 3 break periods.

1. Day/Lunch/Night—Day1 Start, Lunch Start, Day2 Start, Night Start—Setting

Enables the setting of the start time for each time block.

Day 1 Start, Night Start: Enable

Lunch Start, Day 2 Start: Disable

Disable, Enable

Maintenance Console Location

10.4.1 PBX Configuration—[2-4] System—Week Table—Time Setting

Feature Manual References

19.1.2 Tenant Service

19.1.3 Time Service

1. Day/Lunch/Night—Day1 Start, Lunch Start, Day2 Start, Night Start—Hour,

Specifies the start time for each time block. Times can only be set when

Lunch Start, Day2 Start, Night Start—Setting is set to Enable.

Lunch: 12:00

Night: 17:00

Document Version 2016-03

10.4.1 PBX Configuration—[2-4] System—Week Table—Time Setting

1. Day/Lunch/Night—Day1 Start,

PC Programming Manual