Pbx Configuration-[9-4] Private Network-Ndss Key Table - Panasonic KX-NS1000 Pc Programming Manual
Pure ip-pbx
Hide thumbs
Also See for KX-NS1000:
- Programming manual (1182 pages) ,
- Pc programming manual (1012 pages) ,
- Manual (542 pages)
Table of Contents
Advertisement
17.4 PBX Configuration—[9-4] Private Network—NDSS Key Table
17.4 PBX Configuration—[9-4] Private
Network—NDSS Key Table
Extensions at up to 7 other PBXs that will be monitored using Network Direct Station Selection (NDSS) can
be registered. A maximum of 250 extensions can be registered. To create an NDSS button to monitor an
extension, the extension must be registered here first.
To clear NDSS link data, click the NDSS Clear button. The NDSS Clear button can be used only in On-line
mode.
Note that the parameters on this screen can only be set when the
Operator Feature—Network PBX ID is set to 1 in the 17.2 PBX Configuration—[9-2] Private
Network—Network Data Transmission screen.
Network Extension No.
Specifies the number of the remote extension (attached to another PBX) that will be monitored. The number
input here can use either Extension Number Method or PBX Code Method.
Default
Not stored
Value Range
Max. 16 digits (consisting of 0–9, *, and #)
Maintenance Console Location
17.4 PBX Configuration—[9-4] Private Network—NDSS Key Table
Feature Manual References
15.1.12 PRIVATE NETWORK FEATURES
15.1.14 Private Network Features—NDSS (Network Direct Station Selection)
Network Extension Name for Programming Reference
Specifies the name of the network extension. This name is only shown here, not on the displays of extensions.
Default
Not stored
Value Range
Max. 20 characters
Maintenance Console Location
17.4 PBX Configuration—[9-4] Private Network—NDSS Key Table
Feature Manual References
15.1.14 Private Network Features—NDSS (Network Direct Station Selection)
878
PC Programming Manual
Network Data Transmission for Centralized
Document Version 2016-03
Advertisement
Table of Contents
