Panasonic KX-NS1000 Pc Programming Manual page 889
Pure ip-pbx
Hide thumbs
Also See for KX-NS1000:
- Programming manual (1182 pages) ,
- Pc programming manual (1012 pages) ,
- Manual (542 pages)
Table of Contents
Advertisement
DDI / DID / TIE
For each CO line to which DID distribution is set, or for each CO line whose
is Private (TIE), modification parameters for DID number and TIE line call numbers can be programmed.
The Site, Shelf, Slot, and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
Card Type
Indicates the CO line card type (reference only).
Default
Current card type
Value Range
Card type
Maintenance Console Location
18.2 PBX Configuration—[10-2] CO & Incoming Call—DIL Table & Port Settings
Feature Manual References
10.1.11 INCOMING CALL FEATURES
Trunk Property
Indicates the networking type of each CO line (reference only).
Default
Current networking type
Value Range
Public, Private(TIE), VPN
Maintenance Console Location
18.2 PBX Configuration—[10-2] CO & Incoming Call—DIL Table & Port Settings
Feature Manual References
10.1.11 INCOMING CALL FEATURES
15.1.12 PRIVATE NETWORK FEATURES
Distribution Method
Selects the distribution method for incoming CO line calls. The value range of this setting depends on the card
type and Trunk Property assigned for each CO line.
Default
For LCOT2 card: DIL
For PRI23 or V-SIPGW card: DDI/DID
For V-IPGW card: TIE
Document Version 2016-03
18.2 PBX Configuration—[10-2] CO & Incoming Call—DIL Table & Port Settings
Trunk Property on this screen
PC Programming Manual
889
Advertisement
Table of Contents
