Pbx Configuration-[8-1] Ars-System Setting - Panasonic KX-NS1000 Pc Programming Manual
Pure ip-pbx
Hide thumbs
Also See for KX-NS1000:
- Programming manual (1182 pages) ,
- Pc programming manual (1012 pages) ,
- Manual (542 pages)
Table of Contents
Advertisement
16.1 PBX Configuration—[8-1] ARS—System Setting
16.1 PBX Configuration—[8-1] ARS—System Setting
Automatic Route Selection (ARS) automatically selects the appropriate carrier at the time a CO line call is
made, according to the programmed settings. The user-dialed number will be checked and modified in order
to connect it to the appropriate carrier.
ARS Mode
Selects the condition to determine when to operate ARS.
Default
Off
Value Range
Off: ARS is disabled.
On for Local Access Operation: ARS operates when an extension user makes a call using Idle Line Access
method.
On for Any CO Access Operation: ARS operates when an extension user makes a call using Idle Line Access,
CO Line Access, or S-CO Line Access method.
Maintenance Console Location
16.1 PBX Configuration—[8-1] ARS—System Setting
Feature Manual References
4.1.16 CO Line Access
2.1.3 ARS (Automatic Route Selection)
Mode When Any Carrier is not programmed for the Dial
Selects what happens when the dialed number is not found in
Configuration—[8-2] ARS—Leading Number.
Default
Local Access
Value Range
Disconnect: the line will be disconnected.
Local Access: the dialed number will be handled by Idle Line Access method.
Maintenance Console Location
16.1 PBX Configuration—[8-1] ARS—System Setting
Feature Manual References
2.1.3 ARS (Automatic Route Selection)
854
PC Programming Manual
Leading Number in 16.2 PBX
Document Version 2016-03
Advertisement
Table of Contents
