Lpar Manager Key Operations - Hitachi Compute Blade 2000 User Manual
Hide thumbs
Also See for Compute Blade 2000:
- Instruction manual (98 pages) ,
- Update manual (84 pages) ,
- Installation manual (52 pages)
Table of Contents
Advertisement
LPAR manager key operations
You can change or perform operations on any selected item on the LPAR manager screen
by pressing Enter. Use the arrow keys to move the cursor.
The following table shows main keys and their functions.
#
Key
1
Arrow ([↑],
Moves the cursor to a selectable item.
[→], [↓], [←])
Used to increase or decrease the memory allocated to an LPAR
or to set the time.
2
Tab
Moves the cursor to a selectable item.
3
Enter
Executes or changes the settings of the selected item.
Sets the value in the subscreen for selecting (setting) values,
and closes the subscreen.
4
Esc
Press Esc on any LPAR manager screen other than the LPAR
manager Menu screen to display the LPAR manager Menu
screen.
Nothing will happen if you press Esc in the LPAR manager Menu
screen.
Cancels the selection in the subscreen, and closes the
subscreen.
5
Page Up
Scrolls the displayed page up.
Selects the largest value in the subscreen for selecting values.
6
Page Down
Scrolls the displayed page down.
Selects the smallest value in the subscreen for selecting values.
7
F1
Used to specify the size of the memory to be allocated to LPAR
in GB units.
Standard sever blades with LPAR manager firmware 58-4X or
later versions/High-performance server blades with LPAR
manager firmware 78-4X or later versions.
Used to select a VC number and display VC
numbers/Transmission Checksum Protocol (TCP)-port
assignment.
Standard sever blades with LPAR manager firmware 58-3X or
later versions/High-performance server blades with LPAR
manager firmware 78-3X or later versions
Adds processor groups:
Press the F1 key to display a subscreen where you can add a
processor group. Select a target group number and press Enter
8
F2
Displays the memory allocation status on a subscreen in the
LPAR Configuration screen. For more about this function, see
"(14) How to display memory allocation" under "Logical Partition
Configuration" in "Summary of LPAR manager Screens".
Operation/Role
1152
Screen on which
operation is
performed
All screens
All screens
All screens
All screens other
than the LPAR
manager menu
screen
Screens that can be
moved up or down
Subscreens with
which selects a
value
Screens that can be
moved up or down
Subscreens with
which selects a
value
Memory allocation
subscreen for LPAR
Configuration
screen
LPAR Configuration
subscreen to assign
virtual COM for
LPAR configuration
screen
Physical Processor
Configuration
LPAR Configuration
Advertisement
Chapters
Table of Contents
