Canon 1130 Service Manual page 895
Color laser copier
Hide thumbs
Also See for 1130:
- Service handbook (274 pages) ,
- Service manual (901 pages) ,
- Service manual (20 pages)
Table of Contents
Advertisement
CHAPTER 13 TROUBLESHOOTING
Level 1
Level 2
OPTION
BODY
USER
Cont'd
13-306
COPYRIGHT © 2002 CANON INC.
COPIER>OPTION Items
Level 3
CCD-DISP
MODEL-SZ
RCPR-MD
F-WEB
PASCAL
PSCL-MD
EC-GLASS
PSTCL-ON
P-INTVL
P-ADJ-ON
METAL
OHP-MODE
COPY-LIM
COUNTER1
COUNTER2
COUNTER3
COUNTER4
Cont'd
CANON CLC1100/1130/1150/1160/1180 REV.3 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
Description
use it to switch data display on the
DISPLAY>CCD screen (0: normal mode, 1:
precious metal mode)
use it to switch destination (0: AB (6R, 5E), 1:
Inch (5R, 4E), 2: A (3R, 3E), 3: AB/Inch (6R, 5E)
Use it to switch over the mode of reciprocating
operation for the cleaning blade. (0: normal mode;
1: reciprocation ON at all times; 2: reciprocation
OFF at all times)
use it to change the frequency of turning on the
fixing cleaning belt (not used; default=0)
use it to switch gradation correction data, contrast
potential obtained by auto gradation correction (0:
disable, 1: enable)
use it to smooth out the gradations on an image
from an external image controller (0: as before, 1:
smooth out gradation (data) for auto gradation
correction, 2: enable)
use it to select the presence/absence of EC coating
on the copyboard glass (0: absent, 1: present, 2 :not
used, 9: for future expansion)
use it to switch the post-cleaning charging
mechanism (0: normal, 1: all environments)
Use it to change the frequency at which the color
toner concentration of the photosensitive drum is
measured (0 = 25 images, 1 = 50 images, 2 = 75
images, 3 = 100 images).
Use it to execute auto adjustment of the target
settings of the SGNL signal of the patch data when
the starter is first introduced.(0: OFF, 1: ON)
CLC1140/1160/1180 only
use it to turn on/off precious metal mode (0: off, 1:
on, default=0)
use it to select the copy image maximum density
when copying on transparencies (0: Dmax=1.3, 1:
Dmax=1.6, default=0)
use it to change the upper limit on the copy count
(1 to 100)
use it to select a counter type (soft counter 1 on the
control panel of a 120/230-V model) to suit the
user or dealer (0: no counter; 1 through 95)
use it to select a counter type (soft counter 2 on the
control panel of a 120/230-V model) to suit the
user or dealer (0: no counter; 1 through 95)
use it to select a counter type (soft counter 3 on the
control panel of a 120/2300V model) to suit the
user or dealer (0: no counter; 1 through 95)
use it to select a counter type (soft counter 4 on the
control panel of a 20/230-V model) to suit the user
or dealer (0: no counter; 1 through 95)
- Quick Links:
- Service Information
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
