Routing The Lifter Cable - Canon 1130 Service Manual

Color laser copier

Hide thumbs Also See for 1130:

Table of Contents

8) Remove the five screws [10], and detach

the lifter motor unit [11].

6. Routing the Lifter Cable

1) Check to make sure that the lifter drive

shaft and the lifter are held in position

with a hex wrench [1] and long

screwdrivers [2] as shown.

2) Secure the cable fixing plate [3] to the

lifter with two screws.

3) Hook the lifter cable on the upper pulley

4) Hook the ball of the lifter cable on the

pulley [5] of the lifter drive shaft, and

wind the cable along the groove about 1.5

times by hand. At this time, be sure to

keep the lifter cable taut until the long

screwdrivers used to hold the lifter in

place are lifted as far up as they move.

5) Secure the pulley to the lifter drive shaft

with two set screws [6].

6) Secure all pulleys that have been removed

to the lifter drive shaft, and measure the

distance from the base plate of the

compartment to the top face of the lifter to

make sure that the lifter is level.

CANON CLC1100/1130/1150/1160/1180 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)

CHAPTER 10 PAPER DECK

Figure 10-335

Figure 10-336

Show Quick Links

Table of Contents

1120 1100 1160 1180 1140 1150