Removing The Fixing Thermal Switch (Lower); Adjusting The Fixing Nip - Canon 1130 Service Manual
Color laser copier
Hide thumbs
Also See for 1130:
- Service handbook (274 pages) ,
- Service manual (901 pages) ,
- Service manual (20 pages)
Table of Contents
Advertisement
CHAPTER 8 FIXING SYSTEM
10. Removing the Fixing Thermal
Switch (lower)
1) Open the front cover.
2) Remove the fixing cover.
3) Slide out the transfer drum frame.
4) Remove the fixing unit.
5) Remove the two screws [1], and remove
the cable of the thermal switch; then,
remove the screw [2], and detach the
fixing lower thermal switch.
11. Removing the Fixing Thermal
Switch (upper)
1) Open the front cover.
2) Slide out the transfer drum frame.
3) Remove the two screws, and detach the
fixing upper cover.
4) Remove the cleaning belt unit.
5) Remove the two screws [1], and remove the
cable of the thermal switch; then, remove
the screw [2], and detach the thermistor
together with its mounting base.
12. Adjusting the Fixing Nip
• Measuring the Nip Width
If the roller is not hot, wait until the
standby period ends, wait another 15
min, and make 20 copies before
starting the work:
• Taking Measurements
1) Start service mode.
2) Execute FUNCTION>FUSER>NIP-
CHK.
8-20
COPYRIGHT © 2002 CANON INC.
CANON CLC1100/1130/1150/1160/1180 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[1]
[2]
Figure 8-418
[2]
[1]
Figure 8-419
[1]
Figure 8-420
- Quick Links:
- Service Information
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
