Canon 1130 Service Manual page 644
Color laser copier
Hide thumbs
Also See for 1130:
- Service handbook (274 pages) ,
- Service manual (901 pages) ,
- Service manual (20 pages)
Table of Contents
Advertisement
Cause
Photosensitive
drum
Fixing assembly
Optical path
Be sure to adjust the CCD after replacing the scanning lamp, mirror, CCD, or
any other optical part.
COPYRIGHT © 2002 CANON INC.
Step
10
Are there scratches in the
peripheral direction of the
photosensitive surface?
11
Are there scratches in the
peripheral direction of the fixing
upper roller?
12
Are there scratches and dents in the
axial direction of the fixing roller
(upper, lower)?
13
Is there a fault in the fixing oil
applying assembly, oil hose, oil
filter, oil pump, and oil removing
blade?
14
Clean the standard white plate,
scanning lamp, and reflecting plate,
and mirror. Is the problem
corrected?
CANON CLC1100/1130/1150/1160/1180 REV.1 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 13 TROUBLESHOOTING
Checks
Yes/No
Action
NO
Replace the
photosensitive drum. If
scratches are found,
remove the cause. Check
the cleaning blade for
damage by the
photosensitive drum.
(After replacement,
execute the work under
II. C. 2.)
YES
· Replace the fixing
upper roller.
· Check the cleaning
belt take-up
mechanism.
· Check the position of
the fixing separation
claw and the
separation guide.
· Check the fixing blade
for damage.
YES
Replace the fixing roller.
YES
Remove the cause of the
fault, and replace the
part.
NO
Check the inlet to the
fixing assembly for dirt.
If the problem is noted
on the trailing edge of
the image only, replace
the fixing roller.
YES
End.
NO
Clean the surface of the
CCD with a blower
brush. If the problem is
not corrected, replace
the CCD unit.
13-73
- Quick Links:
- Service Information
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
