Table of Contents
Advertisement
2. Install:
• Cylinder head
• Washers
New
• Cylinder head nuts
• Cylinder head bolts
TIP
• Pass the timing chain through the timing
chain cavity.
• Lubricate the cylinder head nuts and wash-
ers with engine oil.
3. Tighten:
• Cylinder head nuts "1"–"6"
• Cylinder head bolts "7", "8"
• Cylinder bolt "9"
Cylinder head nut
1st: 10 Nm (1.0 m·kgf, 7.2
ft·lbf)
2nd: 20 Nm (2.0 m·kgf, 14
ft·lbf)
3rd: 120°
Cylinder head bolt
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
Cylinder bolt
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
TIP
• Using the indicated tightening sequence,
tighten the cylinder head nuts, cylinder head
bolts, and cylinder bolt when the cylinder
head and cylinder are cold.
• Use three steps to tighten the cylinder head
nuts.
4. Install:
• Exhaust camshaft
• Intake camshaft
Refer to "INSTALLING THE CAM-
SHAFTS" on page 5-14.
New
5-20
CYLINDER HEAD
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
