Table of Contents
Advertisement
Page 100
Look-Up Table Write Address Register
REG[0Bh]
7
6
bits 7-0
Look-Up Table Blue Read Data Register
REG[0Ch]
7
6
bits 7-2
Look-Up Table Green Read Data Register
REG[0Dh]
7
6
bits 7-2
S1D13706
X31B-A-001-08
LUT Write Address Bits 7-0
5
LUT Write Address Bits [7:0]
This register forms a pointer into the Look-Up Table (LUT) which is used to write LUT
blue, green, and red data stored in REG[08h], REG[09h], and REG[0Ah]. The data is
updated to the LUT only with the completion of a write to this register. This is a write-
only register and returns 00h if read.
Note
When a value is written to the LUT Write Address register, the same value is automati-
cally written to the LUT Read Address register (REG[0Fh].
LUT Blue Read Data Bits 5-0
5
LUT Blue Read Data Bits [5:0]
This register contains the data from the blue component of the Look-Up Table. The LUT
position is controlled by the LUT Read Address Register (REG[0Fh]). This is a read-only
register.
Note
This register is updated only when the LUT Read Address Register (REG[0Fh]) is writ-
ten to.
LUT Green Read Data Bits 5-0
5
LUT Green Read Data Bits [5:0]
This register contains the data from the green component of the Look-Up Table. The LUT
position is controlled by the LUT Read Address Register (REG[0Fh]). This is a read-only
register.
Note
This register is updated only when the LUT Read Address Register (REG[0Fh]) is writ-
ten to.
4
3
4
3
4
3
Epson Research and Development
Vancouver Design Center
Write Only
2
1
Read Only
n/a
2
1
Read Only
n/a
2
1
Hardware Functional Specification
Issue Date: 01/11/13
0
0
0
Advertisement
Chapters
Table of Contents
