D-Link DWC-1000 User Manual page 84
Wireless controller
Hide thumbs
Also See for DWC-1000:
- User manual (390 pages) ,
- Reference manual (146 pages) ,
- Quick installation manual (53 pages)
Table of Contents
Advertisement
Wireless Controller
configure for Radio 1 (802.11a/n) are not applied to the DWL -3600AP. If the
selected Hardware Type ID for the AP profile is DWL -3600AP, the radio
selectors are not available.
Network: Use the option to the left of the network to ena ble or disable the
corresponding VAP on the selected radio. When enabled, use the menu to
select a networks to assign to the VAP. You can configure up to 64 separate
networks on the controller and apply them across multiple radio and VAP
interfaces. By default, 16 networks are pre-configured and applied in
order to the VAPs on each radio. Enabling a VAP on one radio does not
automatically enable it on the other radio.
VLAN: Shows the VLAN ID of the VAP. To change this setting, click Edit.
L3 Tunnel: Shows whether L3 Tunneling is enabled on the network.
Note: When L3 tunneling is enabled, the VLAN ID configured above is not
used. In fact, the controller puts the management VLAN ID, if any, on the
tunneled packets destined to the AP.
Hide SSID: Shows whether the VAP broadcasts the SSID. If enabled, the
SSID for this network is not included in AP beacons. To change this setting,
click Edit.
Security: Shows the current security settings for the VAP. To change this
setting, click Edit. Redirect Shows whether HT TP redirect is enabled. The
possible values for the field are as follows:
Edit: Click Edit to modify settings for the corresponding network. When you
click Edit, the Wireless Network Configuration page appears.
•
HTTP: HTTP Redirect is enabled
•
None: HTTP Redirect is disabled
83
User Manual
Advertisement
Table of Contents
