Wireless Controller
select the checkbox next to an empty Syslog server field and assign the IP address or
FQDN to the Name field. The selected facility and severity level messages will be
sent to the configured (and enabled) Syslog server once you save this configuration
page's settings.
Figure 194: Syslog server configuration for Remote Logging ( continued)
12.6.3 Event Log Viewer in GUI
Status > Logs > View All Logs
The controller GUI lets you observe configured log messages from the Status menu.
Whenever traffic through or to the controller matches the settings determined in the
Tools > Log Settings > Logs Facility
Configuration
window with a timestamp.
It is very important to have accurate system time (manually set or from a
NTP server) in order to understand log messages.
pages, the corresponding log message will be displayed in this
335
Tools > Log Settings > Logs
or
User Manual