Using Network Resources - D-Link DWC-1000 User Manual
Wireless controller
Hide thumbs
Also See for DWC-1000:
- User manual (390 pages) ,
- Reference manual (146 pages) ,
- Quick installation manual (53 pages)
Table of Contents
Advertisement
Wireless Controller
Apply Policy To: This refers to the LAN resources managed by the DWC-1000, and
the policy can provide (or prevent) access to network resources, IP address , IP network,
etc.
Policy Name: This field is a unique name for identifying the policy. IP address:
Required when the governed resource is identified by its IP address or range of
addresses.
Mask Length: Required when the governed resource is identified by a range of
addresses within a subnet.
Port Range: If the policy governs a type of traffic, this field is used for defining TCP
or UDP port number(s) corresponding to the governed traffic. Leaving the starting and
ending port range blank corresponds to all UDP and TCP traffic.
Service: This is the SSL VPN service made available by this policy. The services
offered are VPN tunnel, port forwarding or both.
Defined Resources: This policy can provide access to specific network resources.
Network resources must be configured in advance of creating the policy to make them
available for selection as a defined resource. Network resources are created with the
following information
Permission: The assigned resources defined by this policy can be explicitly permitted
or denied.
9.2.1 Using Network Resources
Setup > VPN Settings > SSL VPN Server > Resources
Network resources are services or groups of LAN IP addresses that are used to easily
create and configure SSL VPN policies. This shortcut saves time when creating
similar policies for multiple remote SSL VPN users.
Adding a Network Resource involves creating a unique name to identify the resource
and assigning it to one or all of the supported SSL services. Onc e this is done, editing
one of the created network resources allows you to configure the object type (either
IP address or IP range) associated with the service. The Network Address, Mask
Length, and Port Range/Port Number can all be defined for this resou rce as required.
A network resource can be defined by configuring the following in the GUI:
272
User Manual
Advertisement
Table of Contents
