Wireless Controller
Configuration Controller IP Address: Shows the IP Address of the controller that
sent the configuration information.
Configuration: Identifies which parts of the configuration the controller received
from the peer controller.
Timestamp: Shows when the configuration was applied to the controller. The time
is displayed as UTC time and therefore only useful if the administrator has configured
each peer controller to use NTP.
Figure 74: Peer Controller Configuration Status
The following actions are supported from this page
Refresh: Updates the page with the latest information
4.7.4 Peer Controller Managed AP Status
Status > Global Info > Peer Controller > Managed AP
The Peer Controller Managed AP Status page displays information about the APs that
each peer controller in the cluster manages. Use the menu above the table to select
the peer controller with the AP information to display. Each peer controller is
identified by its IP address
MAC Address: Shows the MAC address of each AP managed by the peer controller.
135
User Manual