Wireless Controller
User Manual
Tunnel Name: The active IPv6 to IPv4 tunnel identifier.
IPv6 Addresses: the source IPv6 address(es) in your LAN that have data being sent
over this tunnel.
6.8
ISATAP Tunnels
Advanced>IPv6>ISATAP Tunnels
This feature allows the administrator to configure ISATAP (Intra -Site Automatic Tunnel
Addressing Protocol) is an IPv6 transmission mechanism meant to transmit IPv6 packets
between dual-stack nodes over an IPv4 network. Unlike 6to4, ISATAP uses IPv4 as a
virtual non broadcast multiple-access network data link layer, so that it doesn't require
the underlying IPv4 network infrastructure to support multicast. To configure ISATAP
tunnel administrator needs to configure the following fields:
202