Table of Contents
Advertisement
186
COM2 Serial Data Delimiter Chars: 4
COM1 Serial Data Buffer Size: 20
Number of output characters buffered in inter-packet delay for
COM1.
Com2 Serial Data Buffer Size: 20
RF Frequency Hopping Format: USA or CANADA
(read only) The frequency-hopping rules the radio operates under.
SNMP Enable: disabled
Enable or disable the SNMP agent.
Approved Remotes List Enable: disabled
Enable or disable the Approved Remotes List.
Encryption Enable: disabled
Enable or disable over-the-air data encryption.
HTTP Enable: enabled
Enable or disable the HTTP interface.
Telnet Enable: enabled
Enable or disable the Telnet interface.
HTTP MD5 Authentication: disabled
Enable or disable MD5 digest authentication.
End of Configuration File
Editing Configuration Files
Once the AP radio operation is fine-tuned, use the
Scripts Menu
on Page 87 to save a copy of the configuration onto a PC.
The file can then be used as a template to generate modified copies
adjusted to match other devices. You can modify the configuration files
using a text editor or an automated process (not provided by GE MDS).
We recommend that you review and update the following parameters for
each individual radio. Other parameters may also be changed.
Table 8-1. Common User-Definable Parameters
Field
Comment
IP Address
Unique for each individual radio
IP Gateway
May change for different groups or
locations
Unit Name
Should reflect a specific device.
This information appears in
entraNET MS headings.
MDS entraNET Technical Manual
Configuration
Range
Any legal IP address
Any legal IP address
Any 20-character
alphanumeric string
05-4055A01, Rev. E
- Quick Links:
- Log-In and Configuration
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
