Table of Contents
Advertisement
DIRECT
05-4055A01, Rev. E
—Sets or displays the radio location (1-40 ASCII characters).
LOCATION
—(read only) Displays the current system uptime in the format
UPTIME
.
<YY-MM-DD hh:mm:ss>
—Device serial number.
SER
Sets or displays the configuration for direct-mode operation
(Remote-to-Remote). This is a special mode intended primarily for
railroad applications where Remotes communicate with each other.
Optional arguments:
—Displays all settable optional arguments and their current values.
CMD
You can copy this list to a text file as a record of your configuration.
CWMIN=<range integer>
Minimum Contention Windows size (
: Min=0
0
: Max=15
15
CWMAX=<range integer>
Maximum Contention Windows (
: Min=0
0
: Max=15
15
—Sets or displays the default power-up state direct
DEFAULT=<mode>
mode.
: Default direct state is Direct Mode.
ON
: Default direct state is Infrastructure Mode.
OFF
: Default direct state is controlled by an external I/O pin.
EXT
—In
FEC=<ON|OFF>
ROOT
Correction setting.
: FEC on
ON
: FEC off
OFF
In
HOPTIME=<ms>—
ROOT
frequency hops:
: 7 ms
7
: 14 ms
14
: 28 ms
28
—Sets operation to Direct or Infrastructure mode.
MODE=<mode>
: Enter Direct mode
ON
: Enter Infrastructure mode
OFF
: Enter Direct mode by external control
EXT
MDS entraNET Technical Manual
—In
mode, this command sets the
ROOT
<CWMAX+1
—In
mode, this command sets the
ROOT
).
>CWMIN-1
mode, this command sets the Forward Error
mode, this command sets the time between
).
109
- Quick Links:
- Log-In and Configuration
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
