Setting Sound Program And Decoder Parameters (Dsp); Cinema Dsp 3D; Dinamic Range; Max/Initial Volume - Yamaha RX-V471 Owner's Manual
Av
Hide thumbs
Also See for RX-V471:
- Owner's manual (119 pages) ,
- Easy setup manual (8 pages) ,
- Service manual (127 pages)
Table of Contents
Advertisement
Dynamic
Range
Selects
the dynamic
range
adjustment
method
for audio
bit stream
(Dolby
Digital
and
DTS) signal
playback.
Settings
Maximum
(Default)
Produces
audio without adjusting
the dynamic
range.
Standard
Adjusts the dynamic
range for optimum volume for regular home use.
(Minimum)
Sets the dynamic
range suitable
for low volume or a quiet
environment,
such as at night, for bit stream signals except for Dolby
Minimum/Auto
TrueHD signals.
(Auto) Adjusts the dynamic
range for Dolby TrueHD signals based on
input signal information.
Max Volume
Specifies
the maximum
volume
level that is adjustable
with VOLUME
on the remote
control
or VOLUME
on the front
panel.
Setting range
-30.0 dB to +15.0 dB (5.0 dB increments),
+16.5 dB
Default setting
+16.5 dB
Initial Volume
Sets the initial
volume
for when
the receiver
is turned
on.
Settings
The volume is set at the level when the receiver last entered standby
Off (Default)
mode.
Makes the initial volume Mute or -80 dB to +16.5 dB (0.5 dB
On
increments).
(This setting is only available
when setting a volume lower
than Max Volume.)
Setting sound program
and decoder
parameters
(DSP)
Configuring
the settings
of sound
programs
and surround
decoders.
• Configurable items vary depending on the selected sound program or surround decoder.
CINEMA
DSP 3D
Turns
CINEMA
DSP 3D (p.36)
on or off. When
CINEMA
DSP 3D is set to On, the
CINEMA
DSP 3D mode
automatically
turns
on in a sound
program
(except
for 2ch
Stereo
and 5ch Stereo).
Settings
Off
Disables CINEMA DSP 3D.
On (Default)
Enables CINEMA DSP 3D.
• This setting can be set when the selected sound program supports CINEMA DSR
En
65
- Quick Links:
- Problems and Solutions
- Rear Panel
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
