Connection Method 3 (Tv With Hdmi Input Jacks) - Yamaha RX-V471 Owner's Manual
Av
Hide thumbs
Also See for RX-V471:
- Owner's manual (119 pages) ,
- Easy setup manual (8 pages) ,
- Service manual (127 pages)
Table of Contents
Advertisement
Connecting
a TV
®
@
Turn on the playback
devices,
and then confirm
the following:
Unit: Whether
the input signals
from the playback
devices
are selected
as the HDMI
input source
(any of "HDMI
1-4")= When
it is not selected,
select the correct
input
source
manually.
TV: Whether
the video signals
from the playback
devices
are displayed
on the TV
screen.
Confirm
whether
the unit is linked with operations
of the TV remote
control as follows:
Turning
on/standby,
volume
control
and selecting
audio
output
devices.
If these
operations
are not available,
confirm
that "HDMI Control"
in the "Setup"
menu
is set to "On."
All settings
have been completed.
When a TV program
is selected
with the TV's remote
control,
the input source of the
unit is switched
to "AV4" automatically,
and TV sound
is output.
When these
operations
are not linked,
confirm
that "HDMI
Control"
in the "Setup"
menu is set to "On="
• When
the HDMI
control
function
does not work correctly,
it may be effective
to turn off the devices
to
reset or plug
in the power
cable
and retry with the power
cable plugged
in.
• If the power-on
operation
is not linked,
confirm
the priority
of audio output
settings
for the TV.
Connection
method
3 (TV with HDMI
input jacks)
Connect
a TV to the unit with
an HDMI
cable
and an optical
cable.
HDMI OUT jack
The unit (rear)
HDMI input
AV4 (OPTICAL)
jack
Audio output
(Digital optical)
TV
By switching input source into "AV4" with AV4 key on the remote control or SCENE. TV
sound is output from the unit.
• "AV4" is selected as input sound source from a TV as the default setting. When the AV4 jack is used
for another device, select an input jack to be used for the TV audio in "TV Audio Input" of the "Setup"
menu. Also, when using the SCENE functions (p.32), register the appropriate input source for SCENE
(TV).
• By connecting a TV to the unit with an HDMI cable, each function for the unit can be configured while
viewing the TV monitor (p.60).
• If your playback device is connected to the analog video input jacks (COMPONENT VIDEO or VIDEO), you
also need to connect the TV to the MONITOR OUT (COMPONENT VIDEO or VIDEO) jack with an analog
video cable (p.20).
• When the AV4 jack is used for another device, or another terminal, except when an OPTICAL jack (with an
optical cable) is used for inputting TV sound, select another jack (any of AV 1-6 or AUDIO) for the
connection. Also, set the input sources setting of SCENE (TV) (p.32).
En
19
- Quick Links:
- Problems and Solutions
- Rear Panel
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
