on the numbers of speakers, and then place the speakers
and subwoofer
(with a built-in amplifier) in the room.
The following section describes the representative
speaker configuration
of 2.1 to 5.1 channel system.
NOTEr_
• (U.S.A. and Canada models only) The unit is configured to 8-Qspeakers as the factory setting. 6-Qspeakers can be also connected. For details on settings for 6£_speaker connection, refer to "Changing the speaker
impedance (U.S.A. and Canada models only)" (p.72).
• (Except for U.S.A. and Canada models) Use speakers with an impedance of at least 6£2.
Front (L)
Front (R)
|
Center
Surround
(L)
Surround
(R)
Subwoofer
For the front channel sound (stereo sound) and effect sound
•
•
•
•
•
•
•
•
For the center channel sound (dialogue,
vocals, etc.)
•
For effect and vocal sound from surround
channel. The surround
back channel sound is output from the surround
speakers
•
•
when 7.1- or 6.1-channel
sounds are input.
•
•
For low-frequency
effect (LFE) sound and bass sound from front and surround
channels.
•
•
•
•
• To get recommended speaker layout, refer to "Ideal speaker layout" (p.83).