Connecting A Tv; Connecting Method 1 (Arc-Compatible Tv) - Yamaha RX-V471 Owner's Manual
Av
Hide thumbs
Also See for RX-V471:
- Owner's manual (119 pages) ,
- Easy setup manual (8 pages) ,
- Service manual (127 pages)
Table of Contents
Advertisement
Connecting
a TV
Connect a TV to the unit. The video signals input to the unit are output to the TV.
TV audio can also be output from the unit. The recommended
way to connect a TV
varies depending
on types and functions of video input jacks on the TV.
Select how to connect the TV to the unit while referring to the TV manual.
No ==
i
Yes
_ Connection
method 1 (on this page)
and
Connection
method 4 (p.20)*
No =,"
==
T
.o ,"
m
Connection method 4 (p.20)
Yes
_ Connection
method 2 (p.18)
and
Connection
method 4 (p.20)*
Yes
_ Connection
method 3 (p.19)
and
Connection
method 4 (p.20)*
* Necessary
if your playback
device is connected
to the
video input jacks other than HDMI 1-4 jacks.
HDMI, component
video, or composite video signal input to the unit is output from
the same type of output jack (p.86). Make necessary connections,
and switch the
input source on TV depending
on the playback
device.
What is the HDMI control function?
By connecting
a TV to the unit with an HDMI cable, some operations
for the unit are
available with the TV's remote control, such as turning on/standby
and volume
control. If playback
devices that support the HDMI control function (BD/DVD
players, etc.) are connected
to the unit, these are also acceptable.
For more details,
refer to "HDMI Control" (p.87).
What is the Audio Return Channel
(ARC)?
If your TV supports the ARC, TV audio can be output to the unit by using an HDMI
cable transmitting
video signals from the unit to a TV.
Connection
method
1 (ARC-compatible
TV)
Connect a TV to the unit with an HDMI cable.
• The following connections and steps are supplied, supposing that 'HDMr' in the "Setup" menu has not been
changed from the default setting (p.69).
HDMI OUT jack
The unit (rear)
HDMI input
• By connecting
a TV to the unit with an HDMI cable,
each function
for the unit can be configured
while
viewingthe TV monitor(p.60).
• If your playback device is connectedto the analogvideoinputjacks (COMPONENT VIDEOor VIDEO),you
also needto connecttheTV to the MONITOROUT (COMPONENT VIDEOor VIDEO)jackwith an analog
videocable
(p.20).
Necessary
settings
To use the HDMI control function and ARC, the following settings are required in
advance.
After connecting external devices (TV, playback devices, etc.) and AC
power cable, turn on the unit, TV and playback devices.
Continues
to the
next page
En
16
- Quick Links:
- Problems and Solutions
- Rear Panel
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
