Table of Contents
Advertisement
Available languages
Available languages
To clean the product (DXR 275, DXR
305, DXR 315)
•
Before you clean the product, put a plastic bag
tightly around the air filter on the hydraulic oil tank.
This is to make sure that water does not go into the
hydraulic oil tank.
•
Clean the product with water or compressed air.
•
If the product does not become clean with water, use
a weak cleaning agent.
WARNING:
high-pressure washer or compressed
air directly at electrical components,
hydraulic hoses or seals. Water and
dirt can go into the product and cause
damage.
To clean the hydraulic oil cooler (DXR 95)
WARNING:
hydraulic oil cooler become cool before you
clean it.
•
Clean the area around the hydraulic oil cooler with
water and weak cleaning agent.
•
Clean the cooling fins on the hydraulic oil cooler with
compressed air.
1401 - 005 - 11.01.2024
Do not point a
Risk of burn injury. Let the
•
If the cooling fins do not become clean with
compressed air, use a high pressure washer and a
cleaning agent.
•
To prevent damage to the cooling fins, obey these
instructions:
a) Only use maximum pressure of 100 bar/1450 psi.
b) Make sure that there is a minimum of 40 cm/
15.7 in. between the hydraulic oil cooler and the
nozzle.
c) Point the water or the air straight at the hydraulic
oil cooler, parallel with the cooling fins.
To clean the hydraulic oil cooler (DXR 145)
WARNING:
hydraulic oil cooler become cool before you
clean it.
•
Clean the area around the hydraulic oil cooler with
water and weak cleaning agent.
•
Clean the cooling fins on the hydraulic oil cooler with
compressed air.
•
If the cooling fins do not become clean with
compressed air, use a high pressure washer and a
cleaning agent.
•
To prevent damage to the cooling fins, obey these
instructions:
a) Only use maximum pressure of 100 bar/1450 psi.
b) Make sure that there is a minimum of 40 cm/
15.7 in. between the hydraulic oil cooler and the
nozzle.
Risk of burn injury. Let the
89
Advertisement
Chapters
Table of Contents
