Table of Contents
Advertisement
Available languages
Available languages
•
Examine the ground below the product and the
baseplate for the tower for hydraulic oil. If you find
hydraulic oil, repair the leakage.
•
Examine the hose connectors, the quick connections
for the hydraulic hoses and the cylinders for
hydraulic oil. If you find hydraulic oil, repair the
leakage.
•
Examine other hydraulic components for strips of
dirt. Strips of dirt can identify a leakage.
To examine the product for cracks
A clean product makes it easier to find cracks. There is
an increased risk for cracks at weld seams, holes and
sharp corners.
•
Examine if there are cracks around the brackets
of the outriggers and the bracket of the gear ring.
Also examine the weld seams between the product
chassis and the caterpillar track sides.
•
Examine if there are cracks on the arm system
joints, the cylinder brackets and the welds seams.
D
x4
A
A
1401 - 005 - 11.01.2024
A
B
C
To do welding work on the product
CAUTION:
must do welding work on the product.
•
Speak to an approved Husqvarna service agent.
To lubricate the product (DXR 95)
CAUTION:
lubrication is not followed, there is a high risk
that the seals of the gear ring are pushed
out. If the seals are pushed out, dirt can
go into the ball bearing of the gear ring
and cause damage. Damaged seals must
be replaced.
A
A
A
A
E
Only approved welders
If the procedure for
A
A
A
D
A
29x
A
A
A
A
111
Advertisement
Chapters
Table of Contents
