Table of Contents
Advertisement
Available languages
Available languages
3. Disconnect the exit hose.
4. Remove the pump element (C).
1401 - 005 - 11.01.2024
C
5. Make sure that grease comes out of the hole for
the exit hose (E). Make sure that there are no air
bubbles in the grease that comes out of the hole for
the exit hose.
6. Install the pump element.
7. Go to the "Functions" menu in the remote control.
8. Select "Fill grease hose".
9. Make sure that grease comes from the pump
element.
10. Connect the exit hose.
To fill the grease hose (DXR 95)
If you replace the grease hose, it is necessary to fill the
new grease hose with grease.
1. Go to the "Functions" menu in the remote control.
Tools
Machine status
Functions
Controls
System
2. Select "Fill grease hose".
3. Use the + (A) and - (B) buttons to enter the length of
the grease hose.
Tools
Machine status
Functions
Controls
System
4. Press the button (C) to fill the grease hose. The
product stops when the grease hose is full.
E
Oil refill
Fill grease hose
25
HOSE LENGTH
(25-200) cm
DEFAULT: 25
SET HOSE LENGTH. PRESS TO START
C
A
B
109
Advertisement
Chapters
Table of Contents
