Table of Contents
Advertisement
Available languages
Available languages
Note:
If the incorrect PIN code is entered 5 times,
the product is locked. Speak to an approved service
agent.
To lock the remote control without the PIN code, push
and hold the lock button (A) for more than 3 seconds.
Note:
You can not unlock the remote control without
the PIN code.
For instructions on how to change PIN code, refer to
"Remote settings" on page 68 .
To operate the product
WARNING:
see the product at all times when you
operate it with the remote control. The
operation range of the remote control makes
it possible to move the product also when
you cannot see it. Risk of injury and
damage.
•
Use the joysticks (A) to move the product. Small
movements of the joystick moves the product slowly.
Large movements of the joystick moves the product
faster. The remote control has 4 joystick patterns,
Joystick pattern on page 81 .
refer to
B
A
CAUTION:
carefully. To move the joysticks with
force does not make the performance
of the product better. The joysticks can
become damaged if you operate them
with too much force.
74
Make sure that you can
C
A
Move the joysticks
CAUTION:
control by the joysticks.
•
Turn the knob for adjustment of the tool speed (B) to
adjust the speed of the tool.
•
Turn the knob for adjustment of the product speed
(C) to adjust the speed of the product.
•
To turn the product, operate the caterpillar tracks at
different speeds.
•
To turn the product in small spaces, operate the
caterpillar tracks in different directions.
•
To move the product around corners in small
spaces, move the caterpillar tracks and the tower at
the same time.
To unlock the joysticks on the remote
control
If the joysticks on the remote control are not used for 3
seconds, they are locked. The symbol (A) shows on the
display.
12345 H
Do not lift the remote
A
XX BAR
1401 - 005 - 11.01.2024
Advertisement
Chapters
Table of Contents
