Table of Contents
Advertisement
Available languages
Available languages
the product is in operation, the outriggers must always
be extended.
Tools
WARNING:
manual carefully and make sure you
understand the instructions before using
the machine. You should also read and
understand the manual that accompanies
the tool.
CAUTION:
and the machine's performance (weight,
hydraulic pressure, flow etc) are compatible.
The machine must be equipped with the tools and
accessories appropriate for the job and the machine.
The weight and performance requirements of the
tools are important in determining the suitability
and compatibility for installation on the machine.
Read, understand and follow the handling instructions
in the operator´s manual and the tool supplier´s
recommendations and instructions. Never use the
machine with a tool contrary to operator´s manual or
tool supplier´s recommendations. Contact the machine
manufacturer if you have any doubts. Always read
separate precautions and handling instructions from the
relevant tool supplier before using a new tool.
The machine is recommended to be used with the
following tools or accessories marketed by Husqvarna.
Tools overview on page 148 .
Refer to
The tools are installed on the tool holder on the arm
system. Only use tools that are correct for the operation
task.
4
Please read the operator's
Ensure that the tool's
Hydraulic system
The hydraulic system operates the hydraulic pressure
and flow in the product. The hydraulic system has
a hydraulic oil tank with filters, a hydraulic pump, a
hydraulic oil cooler, hydraulic motors, hydraulic cylinders
and valves of different types. Hoses or pipes connect
the components.
The pressure control valves limit or decrease pressure
to the valves. The flow control valves control the flow
of the hydraulic oil and the speed of the functions of
the product. The directional control valves make sure
that the hydraulic oil goes to different functions of the
product.
The hydraulic system has different pressure levels.
Technical data on page 143 . If many functions
Refer to
are used at the same time, the pressure is set to
the lowest value. If the oil temperature is more than
80°C/176°F, the pressure of the breaker is automatically
decreased. This increases the operation time before the
product becomes too hot.
Intended use
The product is used for demolition in many different
environments and for different types of constructions.
The product can be used in risk areas, for example
where there is a risk that objects can fall down. The
remote control lets the operator control the product at
a safe distance from the risk area. The product can
be used indoors and outdoors. Do not use the product
for other tasks. The product must only be used by
professional operators with experience.
Work is constantly in progress to increase your safety
and efficiency during operation. Speak to your servicing
dealer for more information.
The DXR 145, DXR 275, DXR 305 and DXR 315 can
be equipped for very high temperatures and can also
be used in environments with dangerous materials and
chemicals.
Note:
National/Local regulations could restrict the use
of this product.
1401 - 005 - 11.01.2024
Advertisement
Chapters
Table of Contents
