Restoring Factory Settings - Siemens SINAMICS S120 Commissioning Manual
With startdrive
Hide thumbs
Also See for SINAMICS S120:
- Function manual (1094 pages) ,
- Diagnostic manual (947 pages) ,
- Manual (848 pages)
Table of Contents
Advertisement
Commissioning
5.4 Establishing an online connection to the drive
To display the overview of all of the temporary IP addresses and to delete temporary IP addresses,
proceed as follows:
1. Navigate in the project tree to "Online access" and from there to the appropriate interface.
2. In the shortcut menu, click "Properties".
3. At Configuration, select "IE-PG Access".
5.4.3.7
Restoring factory settings
Overview
In the event of problems during the commissioning via the PROFINET interface X150, we
recommend that you reset the IP settings of the drive to the factory settings. This provides a
defined basis for an error-free commissioning.
Requirements
• There is an online connection to the drive unit (see Chapter "Establishing an online
connection to the drive (Page 152)").
Procedure
To restore the factory settings, proceed as follows:
1. Open the "Online & diagnostics" entry at "Online access".
2. Open the "Functions" entry in the secondary navigation.
166
Commissioning with Startdrive
Commissioning Manual, 06/2020, 6SL3097-5AA10-0BP2
Advertisement
Table of Contents
